Anti-Roll Bar

The only available Anti-Roll Bar type for a Mac Pherson Pivot Arm Suspension is a U-Bar. A U-Bar type Anti-Roll Bar is comprised of two Lever Arms mounted to the Anti-Roll Bar Shaft (also known as working length). The Shaft is mounted to the chassis in a manner that allows the Anti Roll bar to rotate freely forward and backward in the car. Two Drop Links are connected from the Lever Arm ends to either the Wishbone or Strut.

Edit an Anti-Roll Bar;

1.     Select the Suspension Design Item that you want to edit the Anti-Roll Bar of.

2.     Click Summary to display the Input Summary Window.

3.     Scroll down to the Anti-Roll Bar section.

4.     Enter Values.

Pivot – Chassis Pivot

This is the point where the Shaft is mounted to the Chassis.

Attachment

This drop down list gives a list of suspension components that the Anti-Roll Bar can be attached to. For a Mac Pherson Pivot Arm suspension the U-Bar type Anti-Roll Bar can be attached to the Wishbone or Strut.

Drop Link – Anti Roll Bar

This point is where the Drop Link attaches to the Lever Arm

Drop Link – Attachment

This point is where the Drop Link attaches to the suspension component displayed in the attachment drop down list.