|
Batch Run
The batch run feature allows users to run multiple simulations in a row with different suspension pickup point locations of one or more points.
To Run a Batch of Simulations;
1. Add a Design and Motion to the Simulator.
2. Press the Batch Run Simulation button in the Simulator Toolbar.
3. Add the Suspension Points that are to be modified for each run from the Input Tree.
4. Add the Simulation Runs by clicking the Add Run Button.
5. Enter the Suspension Point Values for each Run.
6. Click Run to run the simulations
7. Enter the Name of the simulation in the Simulation Name window.
Once the Simulator is finished the simulation results of all the runs can be viewed and analyzed in the Analysis Section of OptimumK.
Add Run – Adds a new simulation run.
Add Multiple Runs – Adds multiple simulation runs.
Delete Run – Deletes selected simulation run. A run row needs to be selected before the run can be deleted.
Add Input – Adds selected input to table so it can be edited.
Remove Input – Removes selected input from table.
Linearise Input – Evenly spaces the Point Values of a selected Input Point. An input column needs to be selected before an input can be linearised.
Suspension Points – Points that can be modified in the batch run.
Run Button – Runs all the simulation runs simultaneously.
Close Window – Closes the Batch Run Window.
| 
