Truck Arms

The Nascar dedicated rear suspension uses a Live Axle with a Track Bar. This suspension consists of two Trucking Arms that are connected from the chassis to the Axle.

Edit the Truck Arm Geometry;

1.     Select the Suspension Design Item that you want to edit the Truck Arms of.

2.     Click Summary to display the Input Summary Window.

3.     Scroll to the Arms section.

4.     Enter Values

Arms – Chassis

This is the point is where the Truck Arm connects to the Chassis.

Arms – Axle

This is the point is where the Truck Arm connects to the Axle.