Link Points

The Five Links suspension type consists of five individual links connected from the chassis to the upright. In some case two or more of these links can be attached to the same point.

To Edit the Five Link Geometry;

1.     Select the Suspension Design Item that you want to edit the Links of.

2.     Click Summary to display the Input Summary Window.

3.     Scroll to the Link section.

4.     Enter Values

Link 1 – Chassis

This is the point where Link 1 connects to the Chassis.

Link 1 – Upright

This is the point where Link 1 connects to the Upright.

Link 2 – Chassis

This is the point where Link 2 connects to the Chassis.

Link 2 – Upright

This is the point where Link 2 connects to the Upright.

Link 3 – Chassis

This is the point where Link 3 connects to the Chassis.

Link 3 – Upright

This is the point where Link 3 connects to the Upright.

Link 4 – Chassis

This is the point where Link 4 connects to the Chassis.

Link 4 – Upright

This is the point where Link 4 connects to the Upright.

Link 5 – Chassis

This is the point where Link 5 connects to the Chassis.

Link 5 – Upright

This is the point where Link 5 connects to the Upright.