Monoshock Rotational

A Monoshock (Rotational) configuration is comprised of a single Coilover that is actuated from a T-Bar through a pair of Rockers. The T-Bar can rotate freely meaning the Coilover only compresses when both rockers are rotated at the same time (i.e. during Heave and Pitch motions). The Rockers are fixed to the chassis and can only rotate about the Rocker's Axis.

Attachment

This drop down list gives a list of suspension components that the Push/Pull Rod can be attached to. For a Double A-Arm suspension the Push/Pull Rod can be attached to the Upper A-Arm, Lower A-Arm or Upright.

Push/Pull Rod - Rocker

This is the point where the Push/Pull Rod is connected to the Rocker.

Push/Pull Rod - Attachment

This is the point where the Push/Pull Rod connects to the suspension component defined in the attachment drop down box.

Rocker - Pivot

The axis that the Rocker rotates about is defined by the Rocker Pivot and Axis points. The Rocker Pivot point is where the Rocker Axis is located on the Rocker.

Rocker - Axis

This is the other point that defines the axis which the Rocker rotates around.

Drop Link - Rocker

This is the point where the Drop link connects to the Rocker.

Spring - Chassis

This is the point where the Coilover connects to the Chassis.

Spring – T-Bar

This is the point where the Coilover connects to the T-Bar.