Monoshock Sliding

A Monoshock (Sliding) configuration is comprised of a single Coilover that is connected to a Mono Rocker that pivots around a Slide Bar. The Mono Rocker is also allowed to slide laterally on the Slide Bar which is connected to the Chassis. A pair of Push/Pull Rods connect the Mono Rocker to the Upright or any of the Suspension Links

Attachment

This drop down list gives a list of suspension components that the Push/Pull Rod can be attached to. For a Five Links suspension the Push/Pull Rod can be attached to the Upright or any of the suspension Links.

Push/Pull Rod - Pivot

This is the point where the Push/Pull Rod connects to the Mono Rocker.

Push/Pull Rod - Attachment

This is the point where the Push/Pull Rod connects to the suspension component defined in the attachment drop down box.

Slide Bar - Pivot

This is the point where the Slide Bar attaches to the Chassis.

Spring - Chassis

This is the point where the Coilover connects to the Chassis.

Spring – Pivot

This is the point where the Coilover connects to the Mono Rocker.