|
Motion Graphs
The four Motion Graphs are displayed on the right hand side of the screen. In each graph the X value is the percentage of the total time duration of the motion. The Y value is the direction and magnitude of the motion.
Editing Motion Graphs
To add a new Data Point;
1. Activate the Add Data Point button in the Motion Graph Toolbar.
2. Add data points by clicking anywhere in the Motion Graphs.
Alternatively Data Points can be added by;
1. Clicking on a Motion Graph to display the Motion Points Table.
2. Right Clicking on a point listed in the table and selecting New Point.
3. Enter point coordinates into to the Add Data Point Window.
4. Click the Add button.
To Edit existing Data Points:
1. Click on a Motion Graph to display the Motion Points Table.
2. Click on the X or Y value of a Data Point.
3. Enter new value.
To remove a Data Point
1. Activate the Remove Data Point button in the Motion Graph Toolbar.
2. Select the Data Point in the Motion Graph that is to be removed.
Alternatively Data Points can be removed by;
1. Clicking on a Motion Graph to display the Motion Points Table.
2. Right Clicking on a point listed in the table and selecting Delete Point.
Motion Sign Convention
Positive Roll – Clockwise rotation about the Roll Axis. (When viewed from behind vehicle)
Positive Pitch – Anti-Clockwise rotation about the Pitch Axis. (When viewed from left of vehicle)
Positive Heave – Vertically up.
Positive Steering – Wheels turn to the Left. (When viewed from above vehicle)
| 
