|
Motion
Roll
The Roll output channel is the inputted Roll motion measured in degrees (or radians). This output is useful to plot on the x-axis of an Analysis Graph when other outputs need to be compared against Roll angle.
More about Roll Motion…
Pitch
The Pitch output channel is the inputted Pitch motion measured in degrees (or radians). This output is useful to plot on the x-axis of an Analysis Graph when other outputs need to be compared against Pitch angle.
More about Pitch Motion…
Heave
The Heave output channel is the inputted Heave motion measured in millimeters (or inches). This output is useful to plot on the x-axis of an Analysis Graph when other outputs need to be compared against Heave.
More about Heave Motion…
Steer
The Steer output channel is the inputted Steer motion measured in degrees (or radians). This output is useful to plot on the x-axis of an Analysis Graph when other outputs need to be compared against Steering angle.
More about Steering Motion…
%Completion
This is the percentage of the total time duration of the Motion. This output is useful to plot on the x-axis of an Analysis Graph when other outputs need to be compared against a combination of Motions.
A full list of output channels can be found here.
| 
