Push/Pull Rod

Push/Pull Rod configuration is where the Coilovers are connected to the A-Arms via a Rocker. The Rockers are fixed to the Chassis and can only rotate about the Rocker Axis.

Rocker - Pivot

The axis that the Rocker rotates about is defined by the Rocker Pivot and Axis points. The Rocker Pivot point is where the Rocker Axis is located on the Rocker.

Rocker - Axis

This is the other point that defines the axis which the Rocker rotates around.

Spring - Chassis

This is the point where the Coilover connects to the Chassis.

Spring - Rocker

This is the point where the Coilover connects to the Rocker.

Attachment

This drop down list gives a list of suspension components that the Push/Pull Rod can be attached to. For a Double A-Arm suspension the Push/Pull Rod can be attached to the Upper A-Arm, Lower A-Arm or Upright.

Push/Pull Rod - Rocker

This is the point where the Push/Pull Rod connects to the Rocker

Push/Pull Rod - Attachment

This is the point where the Push/Pull Rod connects to the suspension component defined in the attachment drop down box.