Recirculating-Ball

Recirulating Ball type steering is comprised of a Center Link that is rotated about a point on the Chassis when the steering wheel is turned. Two Tie Rods are connected form the Center Link to the Uprights.

Tie Rods – Upright

This is the point where the Tie Rod connects to the Upright.

Tie Rods – Center Link

This is the point where the Tie Rod connects to the Center Link

Pitman Arm – Chassis

This is the point where the Pitman Arm connects to the Chassis

Pitman Arm – Axis

This point (along with the Pitman Arm – Chassis point) defines the axis that the Pitman Arm rotates around

Pitman Arm – Center Link

This is the point where the Pitman Arm connects to the Center Link

Idler Arm – Chassis

This is the point where the Idler Arm connects to the Chassis

Idler Arm – Center Link

This is the point where the Idler Arm connects to the Center Link