Sway Bar

The only available Anti-Roll Bar (Sway Bar) type for the Nascar dedicated suspension is a U-Bar. A U-Bar type Anti-Roll Bar is comprised of two Lever Arms mounted to the Anti-Roll Bar Shaft (also known as working length). The Shaft is mounted to the chassis in a manner that allows the Anti Roll bar to rotate freely forward and backward in the car. Two Drop Links are connected from the Lever Arm ends to the Lower Control Arm.

To Edit the Sway Bar;

1.     Select the Suspension Design Item that you want to add the Sway Bar to.

2.     Click Summary to display the Input Summary Window.

3.     Scroll down to the Sway Bar section.

4.     Enter Values.

Pivot – Chassis Pivot

This is the point where the Shaft is mounted to the Chassis.

Drop Link – Sway Bar

This point is where the Drop Link attaches to the Lever Arm.

Drop Link – Attachment

This point is where the Drop Link attaches to the Lower Control Arm.