U-Bar

A U-Bar type Anti-Roll Bar is comprised of two Lever Arms mounted to the Anti-Roll Bar Shaft (also known as working length). The shaft is mounted to the chassis in a manner that allows the Anti-Roll bar to rotate freely forward and backward in the car. Two drop links are connected from the Lever Arm ends to the Upright, Rocker or any of the suspension Links.

Pivot – Chassis Pivot

This is the point where the Shaft is mounted to the Chassis.

Attachment

This drop down list gives a list of suspension components that the Anti-Roll Bar can be attached to. For a Five Links suspension the U-Bar type Anti-Roll Bar can be attached to the Upright, Rocker or any of the suspension Links.

Drop Link – Anti Roll Bar

This point is where the Drop Link attaches to the Lever Arm

Drop Link – Attachment

This point is where the Drop Link attaches to the suspension component displayed in the attachment drop down list.