U-Bar

A U-Bar type Anti-Roll Bar is comprised of two Lever Arms mounted to the Anti-Roll Bar Shaft (also known as working length). The shaft is mounted to the chassis in a manner that allows the Anti-Roll bar to rotate freely forward and backward in the car. Two drop links are connected from the Lever Arm ends to the Upper A-Arm, Lower A-Arm, Rocker or Upright.

Pivot – Chassis Pivot

This is the point where the Shaft is mounted to the Chassis.

Attachment

This drop down list gives a list of suspension components that the Anti-Roll Bar can be attached to. For a Double A-Arm suspension the U-Bar type Anti-Roll Bar can be attached to the, Upper A-Arm, Lower A-Arm, Rocker or Upright.

Drop Link – Anti Roll Bar

This point is where the Drop Link attaches to the Lever Arm

Drop Link – Attachment

This point is where the Drop Link attaches to the suspension component displayed in the attachment drop down list.